background image

Toll Free 1-888-658-1658             www.outdoorlivingtoday.com         [email protected]

Page 7

B. Wall Section

9. 

Position Interior Wall Cleats against rear wall 

in corner. Attach each Cleat with  

2 - 2 1/2” screws

. Attach cleats to each corner of 

your shed. Cleat provides an edge to screw 
Interior Wall Panel to in 

Step 10 & 14

Hardware 

S1

 

- 2 1/2” Screws

 

x 8 total

Parts

 

2C - Interior Wall Cleats 

(1 1/2” x 2 1/2” x 12”) 

x 4

10. 

Locate Left Solid Wall Panel (42 3/4” wide). 

The left panel will have wall siding recessed on 
the left side as illustrated above. Position on wall 
studs and secure with 

6 - 1 1/4” screws

Hardware 

S2

 

- 1 1/4” Screws

 

x 6 total

Parts

 

1A - Solid Wall Panel Left 

(42 3/4”w x 75 1/4”) 

x 1

Siding recessed on 
left side of panel.

8. 

Locate both Ceiling Gussets. On a ladder, 

position 1st Gusset evenly against ceiling trim. 
Drill pilot holes with appropriate angles before 
fastening. Secure with 

2 - 4” Torx screws

 per 

side. Complete both gussets. Torx drive bit 
required.

Parts

 

8C - Ceiling Gusset 

(2 1/2 x 5” x 52”) 

x 2

Hardware 

ST2

 

- 4” Torx Screw

 

x 8 total

Pre-drill siding 
with 1/8” drill bit

Summary of Contents for 12x8 Cabana Garden Shed

















Reviews: