Parts (Step 72)
Regular Window Trim
x 2
Hardware (Step 72)
N1 -1 1/2” Finishing Nails
x 32 total
72.
Position
Window Trim
around window doing a dry run first and
attach with
4 - 1 1/2” Finishing Nails
per piece.The regular window kit is
1” x 24 1/16”=top (angle cut on ends), 3” x 23” = Sides and Bottom.
Window trim has a small dado on reverse face. Outside flange of window
will roughly sit in the dado to give a better fit.
Trim dado
sits in flange.
Parts (Step 73)
Flower Box Kits
x 2
Hardware (Step 73)
S1 - 2 1/2” Screws
x 4 total
73.
Assemble
Flower Box Kits
with Assembly Instructions included
on Page 46. Position completed Flower Box below bottom of window
trim and secure with
2 - 2 1/2” screws
. Screw from inside of box into
the center wall stud. Attach second screw 2” underneath first screw and
once again into the wall stud. Install Flower Box Kits underneath each
window.
Congratulations on completing
your new 12 x 12 Spacemaker
Garden Shed!
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 40
