Olivetti Photo Wireless Any_Way, User Manual

Page: 14 / 55

CHAPTER 1 10
LOADING PAPER
1 Raise the two paper supports into their upright position, then squeeze and slide the paper width guide
to its outermost position.
note: When raising the paper supports make sure that they are in their correct upright position.
2 Load the paper vertically (portrait orientation), the side to print on facing the front of the printer and
against the guide on the right side of the paper support.
Squeeze and slide the left paper guide against the left edge of the paper.
Loading Different Types of Paper
To load: Proceed as follows:
Plain paper, coated
paper, glossy paper,
photo paper,
greeting cards,
index cards, post
cards, envelopes,
transparencies,
ink-jet labels • Load the media vertically against the right side of the paper support and with
the print side facing up.
• Squeeze and slide the paper guide against the left edge of the paper.
note: Load letterhead paper with the top of the letterhead entering the printer
first and facing up.
Banner paper • Remove all paper from the paper support.
• Insert the leading edge of the banner paper vertically into the printer against
the right side of the paper support and with the print side facing up.
note: Do not use perforated fan-fold banner paper.
• Squeeze and slide the paper guide against the left edge of the banner paper.
Iron-on T-shirt
transfers • Read the instructions on the transfer package.
• Load the blank side of the iron-on transfer vertically against the right side of
the paper support and facing up.
• Squeeze and slide the paper guide against the left edge of the transfer.