Olivetti d-COPIA 3500MF Operation Manual Download Page 471

Page: 471 / 556

Troubleshooting

12-15

Error Message

Checkpoints

Corrective Actions

Reference

Page

The cover is open.

Is there any cover which is
open?

Close the cover indicated on the
touch panel.

—

The folding tray is
open.

—

Set the folding tray.

—

The folding unit is
open.

—

Close the folding unit.

—

The phone receiver is
off the hook.

—

Put down the receiver.

—

The removable
memory is not
formatted.

Is the removable memory
formatted by this machine?

Perform [Format] on this machine.

—

The slit glass requires
cleaning.

—

Clean the slit glass using the cleaning
cloth supplied with the document
processor.

11-16

Toner is empty.

—

Replace the toner container to our
specified toner container.

11-2

Toner is running out.

—

It is almost time to replace the toner
container. Obtain a new toner
container.

—

Tray # is full of paper.

Is the acceptable storage
capacity exceeded?

Remove the paper. Printing then
resumes.

—

Unknown toner
installed.

Is the installed toner
container our own brand?

We will not be liable for any damage
caused by the use of third party
supplies in this machine.

—

Unknown Toner
Installed. PC

Does the installed toner
container's regional
specification match the
machine's?

Install the specified container.

—

Summary of Contents for d-COPIA 3500MF













































































































































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA 3500MF

Reviews:

Brands by name

Popular brands

Olivetti d-COPIA 3500MF, Operation Manual

Search results

Summary of Contents for d-COPIA 3500MF

Reviews:

Brands by name

Popular brands