CHAPTER 4 BASIC OPERATIONS
4-6
This function turns the machine off to save energy by pressing the
Energy Saver (preheat) key, while leaving the main switch turned ON.
When this function is activated, the Energy Saver (preheat) indicator
is the only lit indicator on the operation panel.
* To resume copying after the energy saver (preheat) function has
been activated, press the Energy Saver (preheat) key again. It takes
about 30 seconds for the copier to recover from the energy saver
(preheat) function.
* The auto energy saver function can be set to trigger after no copying
has been done for a certain period of time. (See “Auto preheat time”
on page 6-7.)
5. Auto shut-off function
This function automatically turns the main switch OFF (O) if no
copying operation is preformed for a certain period (15 to 240
minutes). To make copies again, set the main switch to the ON (|)
position.
●
Auto shut-off function
The auto shut-off function is a power saving feature which automati-
cally turns OFF (O) the main switch when a certain time elapses
without copying being performed. Copiers are generally in the standby
mode more than operation mode, and power consumption in the
standby mode occupies a large part of overall consumption. Having
the copier turn OFF (O) automatically reduces unnecessary power
consumption in the standby mode or at night when the copier is left
on. The result is a lower electricity bill.
* To change the time until the auto shut-off function starts, see “Auto
shut-off time” on page 6-7. To cancel the auto shut-off function, see
“Auto shut-off” on page 6-7.
4. Energy saver (preheat) function
Summary of Contents for d-Copia 15
Page 1: ...COPIER OPERATION MANUAL Cod 533348C...
Page 10: ...2 1 CHAPTER 2 NAMES OF PARTS 1 Main body...
Page 56: ......
