CHAPTER 2 NAMES OF PARTS
2-2
1
Original cover
(Open/close to set the original on the platen.)
2
Operation panel
(Contains the keys and indicators for operating the copier.)
3
Left cover handle
(Hold to open the left cover.)
4
Left cover
(Open when a paper misfeed occurs.)
5
Multi-Bypass
(Load paper here when copying onto small-size or special paper.)
6
Insert guides
(Be sure to set the paper width when loading paper on the multi-
bypass.)
7
Support guide
8
Toner cartridge
9
Toner cartridge release lever
(Operate to replace the toner cartridge.)
0
Waste toner tank
!
Waste toner tank release lever
(Operate to replace the waste toner tank.)
@
Cleaning shaft
(Pull and push back in after toner cartridge replacement or when
copy images become soiled with toner.)
#
Front cover
(Open to replace the toner cartridge or waste toner tank.)
$
Main switch
(Turn ON (|) before starting to make copies.)
%
Copy store section
(Copied paper is stored here.)
^
Ejection section
&
Drawer
(Holds up to 250 sheets of standard paper [standard paper as
specified by our company].)
*
Platen
(Set originals here for copying. Place originals face-down with the
edges aligned with the size scales on the left and rear sides of the
platen.)
(
Original size scales
(Be sure to align the original with these when setting the original
on the platen.)
)
Length adjustment plate
(Adjust to the length of the paper to be set in the drawer.)
⁄
Width adjustment lever
(Hold the lever and adjust the width guide to the width of the paper
to be set in the drawer.)
¤
Drawer bottom plate
(Push down when loading paper.)
‹
Handles for transport
(The right two handles are indented handles. The left two become
handles when pulled out.)
Summary of Contents for d-Copia 15
Page 1: ...COPIER OPERATION MANUAL Cod 533348C...
Page 10: ...2 1 CHAPTER 2 NAMES OF PARTS 1 Main body...
Page 56: ......
