Olivetti d-COLOR MF652 Troubleshooting Manual Download Page 109

Page: 109 / 121

d-Color MF 752/652

11-19

11.3

Error code list

Scan server sending

The scan server returned an error due to invalid request.

Addresses for secondary distribution are not supported.

The destination address is not included in PSP.

The scan server returned an error due to access by an unauthor-
ized user.

The scan server returned an error due to a request for invalid ac-
tion.

The scan server returned an error due to transmission of unregis-
tered PSP to the scan server.

The scan server returned an error due to a request for invalid ac-
tion.

The scan server returned an error due to use of a format that is not
supported.

The specified parameter is invalid.

The WebService or WSD-Scan function is invalid.

The connection aborted by the network.

The connection is suspended.

The I/O buffer capacity is in short.

No connection exists with the client.

The connection has been interrupted.

NICFUM is busy.

2236

The SSL certificate has expired.

2238

The CN field of the certificate does not match the server address.

2239

The certificate does not have the expected usage.

2240

The certificate could not be trusted. To trust the certificate, the
certificate must be registered to the system.

2241

The certificate has expired.

2242

Cannot connect to the CA server upon certificate verification.

2243

Time out occurred at the time of the certificate verification.

2244

The size of the expiration list is too large.

2261

The format of the certificate is invalid.

2263

No verification can be performed as he hard disk path has not
been specified yet.

2264

Unable to perform verification because there are too many certifi-
cates to be verified (the maximum number of certificates that can
be verified at a time is 20).

2265

Parameter of the certificate verification is invalid.

2266

Internal error of the certificate verification/management module.

2267

The device certificate does not exist.

2268

No certificate is sent from the communications peer.

Functions

Code

Description

Summary of Contents for d-COLOR MF652


























































































































Search results

Summary of Contents for d-COLOR MF652

Reviews:

Related manuals for d-COLOR MF652

Brands by name

Popular brands

Olivetti d-COLOR MF652, Troubleshooting Manual

Search results

Summary of Contents for d-COLOR MF652

Reviews:

Related manuals for d-COLOR MF652

Brands by name

Popular brands