Olivetti 3D S2, Service Manual

Page: 84 / 112

4-42 Service Manual Y118040-3
UNMOUNTING THE DISPLAY
1. Undo the screws on the side of the printer console ( A ).
2. Undo the setscrew of the jog dialer ( B ).
3. Extract the console so as to be able to access the electronic parts.
4. Undo the four locking screws ( C ).
Figure 4-69
5. Disconnect the flat cable ( D ) from the console.
6. Disconnect the flat cable of the SD Card from the display ( E ).
Figure 4-70
7. To reassemble follow the same procedures described above but in reverse order.
A
B
C
D
E