Olivetti 3D S2, Service Manual

Page: 27 / 112

Y118040-3 Service Manual 3-5
It is recommended that two persons carry out this operation, proceeding as follows:
6. Unpack the printer, load it onto the forklift truck and lift it up to the height of the work table.
Figure 3-7
7. Lift the printer to the height of the work table (arrow 1) and manually rest it on the surface (arrow 2).
NOTE:
The printer bottom must rest entirely on the surface
Figure 3-8
8. Move the forklift truck away.
Figure 3-9
1
2