Olivetti 3D S2, Service Manual

Page: 50 / 112

4-8 Service Manual Y118040-3
In order to select a given command or menu you must press the jog dialer.

From the Menu Start page select the Prepare menu .

Position on and select the Move Axis menu .

Select Move 1 mm.

Select Move Z then rotate the jog dialer anti-clockwise to move the printing plate downwards.
Figure 4-11 Command sequence for lowering the printing plate
3. Using the 12 mm hex wrench hold the hot-end block still while unscrewing the nozzle using the 10 mm hex
wrench.
Figure 4-12
10 mm Wrench
12 mm Wrench