Olivetti 3D S2, Service Manual

Page: 33 / 112

Y118040-3 Service Manual 3-11
CONTROL MENU
The Control menu gives you access to all printer parameter settings, allowing you to modify each one singly
as you need. From this menu you can access the following submenus:
Figure 3-22 Control menu
and related submenus

Temperature

Motion

Restore failsafe
Temperature :
Accessing the Temperature menu you can adjust the temperature of Nozzle 1.
To do this, use the jog dialer to move to the Nozzle command then confirm by pressing the dialer.
Rotate the jog dialer to set the temperature to the desired level then press to confirm; in this way the machine
will heat the nozzle to the temperature value set.
Similarly, by selecting
Nozzle 2 , you can set the temperature for the second nozzle.
Figure 3-23
To set the temperature of the printing plate, select
Bed then rotate the jog dialer to the required value.
Figure 3-24