Oliver 758-N, User Operating Instructions Manual

Page: 8 / 51

758-N Front Load Dual-Slicer
0758S20005 4-1
OPERATING INSTRUCTIONS
(Shown using single slice thickness unit)
WARNING
ALWAYS USE CARE WHENEVER WORKING NEAR THE CUTTING KNIVES.
To operate the slicer, stand in front of the machine and grasp the lever with your right
hand. Pull the lever all the way down and hold it in that position. Using your left hand
load the product into the machine.
WARNING
NEVER START THE MACHINE BEFOE LOADING THE PRODUCT.
Select the desired thickness according to the customer and make sure that the product
does not hang over either edge of the cradle. While holding the lever completely
forward, (the machine will not start unless this is done), push the Green “Start” button
with your left hand.
After starting the machine restrain the hand lever slightly allowing it to return slowly until
the knives have contacted
AND penetrated the crust on the product. At this point allow
the lever to return at its own speed.