Oliver 758-N, User Operating Instructions Manual

Page: 13 / 51

758-N Front Load Dual-Slicer
0758S20006 5-4
Trouble Shooting (Continued)
The Bread is Cutting Slowly or is Being Damaged
•
The product you are attempting to slice is below the minimum height capacity of the
machine.
•
You are pushing the lever of the machine in an attempt to speed slicing. This may
not only damage the product but may also damage the machine.
•
If only certain products are cutting slowly the cutting speed you are experiencing may
be normal for that particular product.
•
The knives of the machine have become worn, (dull). (See the “Maintenance” section
of this manual under “Changing the Cutting Knives”). Most owners can perform this
item of maintenance without calling a service company.
•
The blades are not aligned properly. (See the “Maintenance” section of this manual
under “Adjusting the Clearance Between the Blade Frames” on how to perform this
adjustment.)
•
The Gas spring may require adjustment or replacement. (See the Maintenance
section of this manual under “Gas Spring Replacement” on how to perform this task.)