MODEL 711 COUNTER TOP SLICER
0711S20007-
2
TROUBLE SHOOTING GUIDE (Continued)
PROBLEM
PROBABLE CAUSES (S)
REMEDY
Switches are turned
Motor or drive system is
Repair or Replace
ON, motor hums but
binding. (Defective bearings.)
will not start.
Interference between parts
Adjust or repair
SEE CAUTION
of the slicer mechanism.
Foreign matter in the pusher Clean
the tracks.
Hand lever pulls hard
tracks.
Gas spring may require
see "Adjustments"
adjustment
CAUTION
DO NOT
ALLOW THE MOTOR TO HUM WITHOUT STATING AS THIS
WILL DAMAGE THE MOTOR BY CAUSING IT TO OVERHEAT.
NOTE
A special non-ventilated motor must be used with this slicer.
