MODEL 711 COUNTER TOP SLICER
REV. 11-30-00
0711S20002
SLICER INSTALLATION
WARNING
THE SLICER IS HEAVY. USE PROPER LIFTING TECHNIQUES, KEEP
BACK STRAIGHT, KNEES BENT, AND LIFT WITH YOUR LEGS. USE
GLOVES TO PROTECT YOUR HANDS
CAUTION
NEVER
LIFT THE SLICER BY ITS SIDE COVERS.
CAUTION
BEFORE PLACING THE SLICER ON THE TABLE OR COUNTER,
MAKE SURE THE TABLE OR COUNTER CAN SUPPORT THE
SLICER’S WEIGHT WHICH IS APPROXIMATELY 255 POUNDS.
Lift the slicer from its resting surface with one person standing on each end of the slicer
as shown below. set the slicer onto the counter or table as close as possible to its
desired location.
If the machine is not in its final location, slide it to the desired position. Make the final
height adjustments and leveling by turning the levelers clockwise to lower and
counterclockwise to increase the height. Use a 3/8” wrench for this adjustment.
