Oliver 4275C, Owner'S Manual

Page: 24 / 70

24 | Page Oliver Machinery 4275C Jointer
Leveling Machine
This jointer should be positioned on a level, stable floor. If the machine is rocking on the floor, or if it
vibrates excessively during operation, please adjust the rubber feet to level the machine:
1. Loosen the jam nut to unlock the leveling foot.
2. Rotating the leveling foot to adjust its height.
3. Make adjustments on all other leveling feet until the machine is
completely leveled.
4. Tighten jam nuts of all adjusted leveling feet.
Dust Collection
This jointer can generate a lot of wood shavings and dust. Connect a dust
collection system to this machine.
The minimum CFM requirement for this jointer is 700 CFM at the dust port,
which means your dust collection system should have a rating greater than
700 CFM, as air friction and leakage reduce effective CFM at the dust port.
IMPORTANT
Running this jointer without a dust collection system, or using a dust collection
system with inadequate suction, will cause dust and shavings to accumulate
inside the jointer. This can damage the machine and cause other hazardous
situations. Check your dust collection system regularly to make sure it is not
jammed or filled up.