Oliver 4275C, Owner'S Manual

Page: 19 / 70

4275C Jointer OLIVERMACHINERY.NET 19 | Page
Inventory
Carefully unwrap the packaging and inventory the items received:
Item Description Quantity
1 T-Handle torx drivers (T-25) 2
2 Spare Cutter Inserts and Torx Screws 10 each
3 12/14 mm Combination Wrench 1
4 Metric hex wrench set (5,6,8 mm) 1 each
5 Push blocks 2
6 Cutterhead guard 1
NOTICE: If you cannot find an item in the list above, please check if it is still attached to the packaging or
inside the cabinet. Occasionally the item may have been pre-installed in the factory. See section “ Parts
List ” to check if a component is included or in stalled.
NOTICE: This machine comes with various standard-sized, non-proprietary parts. If any of these parts are
missing, we are happy to deliver them to you. To have the machine up and running as soon as possible,
you can also find these parts at your local hardware store.
Additional Items Recommended for Machine Setup
Item Purpose
Safety Glasses Protection
Disposable Gloves Protection
Paper Towel / Rags Cleaning
Rust Inhibitor Cast iron rust protection.
Straight edge Check alignments.
Metric Combination
Wrench Set Assembly and Maintenance
Metric Hex Wrench Set Assembly and Maintenance
Torque Wrench Cutter inserts installation and for checking Torx screw tension (52-60 lb-
in).
T25 Star Bit Socket Cutter inserts installation.
Ring Terminal Connector
and Crimping Tool Connecting machine to power.
IMPORTANT: Always follow local electrical code for electrical work .