Olimpia splendid Sherpa AQUADUE S3 E, Instructions For Installation, Use And Maintenance Manual

Page: 90 / 316

EN - 32
ENGLISH
Display alarms
Error
code
Error description
E01
E01 inlet water temperature sensor
faulty
E02
E02 outlet water temperature sensor
faulty
E03 E03 DHW temperature sensor faulty
E04
E04 external air temperature sensor
faulty
E05
E05 main exchanger antifreeze
protection
E06 E6 water flow switch error
E07 E07 UE communication error
E08 E08 disinfection function failed
E09 E09 RS485 communication error
E20 E20 DHW circuit flow switch error
E21
E21 DHW evaporator antifreeze
protection
E22 E22 DHW compressor overheating
E23
E23 DHW compressor temperature
sensor faulty
E24
E24 DHW condenser temperature
sensor faulty
E25
E25 DHW evaporator temperature
sensor faulty
E26 E26 solar temperature sensor faulty
E27 E27 display communication error
Override
code
Override description
OR01 inlet water temperature low
OR02 evaporator antifreeze protection
OR03 external boiler activation request
OR04 TA input open
OR05 UE capacity limitation
OR06 UE defrosting cycle
OR07 UE not available in DHW_B
OR08 DHW flow switch protection
OR09 DHW evaporator antifreeze protection
OR10 DHW compressor temperature protection
OR11 water pump maintenance
OR12 water filter maintenance
OR13 DHW pump maintenance
External unit display alarms
On the control board of the external unit is located a
display which shows the alarms of the external unit:
Alarm
code
Alarm description
E1 02 Power supply phases malfunction
(only for 3-phases models)
P6 26 Protection of the frequency conversion
module
F1 116 DC voltage too low
HF 54 EEPROM fault of the main board
HH 55 Error H6 has occurred 10 times in 120
minutes
E5 06 Evaporator temperature T3 probe fault
E6 07 External air temperature T4 probe
fault
E9 10 Compressor suction temperature Th
probe fault
EA 11
Compressor delivery temperature Tp
probe fault
P0 20 Low pressure protection
P1 21 High pressure protection
P3 23 Compressor overcurrent protection
P4 24 Compressor delivery temperature Tp
protection
Pd 33 Evaporator temperature T3 protection
H0 39 Fault in the communication between
UI and UE
H1 40 Fault in the communication between
main board and driver board
H6 45 DC fan fault
H7 46 Compressor DC voltage protection
fault
H8 47 Pressure sensor fault
HE 53 The fan has worked for 10 minute in
Zone A in heating mode
HP 57
The low voltage protection has
occurred 3 times in 1 hour in cooling
mode
H4 43 P6 protection has occurred 3 times
C7 65 Inverter module overtemperature
protection