Olimpia splendid Sherpa AQUADUE S3 E, Instructions For Installation, Use And Maintenance Manual

Page: 69 / 316

SHERPA AQUADUE TOWER
m
max
=
m
max
=
2,5 x (LFL)
(5/4)
x h
0
x (A)
1/2
SF x LFL x h
0
x A
Anv
min
=
m
c
- m
max
A M
LFL x 104 g x m
max
M - 29
x x
EN - 11
ENGLISH
•
Table 2
The maximum load of refrigerant in a room must be compliant with what follows:
And must not be lower than
Acronym Description
m
max
Is the maximum allowed load of refrigerant in the system in kg
LFL Is the lower flammability in kg/m
3
A Is the room area in m
2
h
0
Is the release height, the vertical distance in (m) from the floor to the release
point when the appliance is installed
SF Is a safety factor with a value of 0,75
- Systems with a load of refrigerant <1,842 kg are not subject to minimum area requests.
- For 8/10kW units, loads exceeding 2,22 kg are not accepted (maximum length of the pipes equal to
30m).
- For 12/14/16 kW units, loads exceeding 2,41 kg are not accepted (maximum length of the pipes equal
to 30m).
• Table 3
Minimum ventilation area
for natural ventilation: internal unit
Acronym Description
Anv
min
Is the minimum opening for natural ventilation in m
2
m
c
Is the effective load of refrigerant in the system in kg
M Is the molar mass of the refrigerant
g Is gravity acceleration of 9,81 m/S
3
29 Is the average molar mass of air in kg
A
min
Is the required minimum area of the room in m
2