Olimpia splendid Sherpa AQUADUE S3 E, Instructions For Installation, Use And Maintenance Manual

Page: 84 / 316

P12 P16
P13 P17
P14 P11
i1 i3 i2 i4 i5
P15
P1 P10
P2 P9
P3
P4 P6 P5 P7
P8
EN - 26
ENGLISH
5 - CONTROL PANEL
The control panel, located on the front panel, is a visualization, configuration and control graphic display.
The interface is structured through a menu where you will find graphic symbols, icons and messages.
Press on the icons to access submenus in order to start heating and cooling, to configure water production,
to configure the heat pump, to access or enable a function, to track the operating status.
Some functions are only accessible to the installer, service or factory.
Access is allowed through a password which can be requested based on your own competence.
5.1 - MAIN SCREEN
P1. Climatic curve enabled
P2. Production of domestic water in progress
P3. Active mode (standby, cooling, heating,
only domestic hot water)
P4. Energy saving function
P5. Night function
P6. Error followed by the corresponding code
P7. Override followed by the corresponding
code (the override is not a malfunction
report)
P8. Address of the heat pump in case of
configuration of various units in cascade
mode
P9. Anti-Legionella function in progress
P10. Production of domestic water disabled
P11. System water temperature
P12. Timer active
P13. Holiday program
P14. Rating active
P15. Domestic water temperature
P16. Timer active
P17. Holiday program
i1. Modes of operation menu
i2. Desired temperature setting
i3. System temperatures
i4. Timer menu
i5. Functions menu