3.6.2 - ECO key
•
Press
B8
on the remote control to activate the energy conservation function, automatically optimizing the
unit's
features (on the display symbol
D19
appears).
3.6.3 - Turning the unit ON/OFF
•
Press key
B1
on the remote control to activate or deactivate (stand-by) the unit. The control system of
the unit is equipped with memory so all the settings are saved when power is interupted.
If the unit will be idle for extended periods of time it must be deactivated by
turning the main switch off or unplugging the unit.
3.6 - DESCRIPTION OF THE
UNIT'S
FUNCTIONS
3.6.1 - Main switch-on and running management
•
The
unit
is equipped with a power switch (10) positioned in the upper right corner under the door
(7);
the
switch (10) must be positioned to “
I
” (fig. 38) in order to work.
P
lace
switch in
the
“
I
”
position
to start the
unit.
•
Once these operations have been carried out, the
unit
may be regulated using the remote control.
in
order to transmit commands to the indoor
unit
, point the front of the remote control toward the
unit
’s
control panel.
•
The
device emits a beep when it receives a command.
•
The maximum distance from the
unit
to the remote is
33
' (10m)
with
fully c
harged
batteries.
32
3.6.4 - Operation in “Cooling” mode only
• When used in this mode, the
unit
dehumidifies and cools the room.
• To activate this mode, press several times the key
B5
on the remote control until when the symbol
D2
appears on its display.
• In this run mode, the required temperature and fan speed can be set.
after
a
maximum
of 3 minutes
the compressor will start and
the
unit
enters cooling mode
.
3.6.5 -
Operation in “Dehumidi ication” mode
•
I
n this mode the
unit reduces
humidity in the
space while not providing as much cooling
.
this function
can be extremely useful between seasons, particularly on rainy days when the temperature
is not
uncomfortable but the excess humidity feels unpleasant.
• In this mode both room temperature and fan speed settings are ignored, which correspond to minimum.
• Any fan temperature and speed indication then disappears from the display (LED6) of the control panel
(fig.C).
• To activate
,
press
the
B5
key
on the remote control
mltiple times
until
the display shows
symbol
D3
and the
automatic
fan
symbol
D18
(fan + first notch) appear on its display.
• In this mode it is normal for the
unit
to function intermittently.
Summary of Contents for Maestro Pro 01925
