Olimpia splendid DOLCECLIMA, Instructions For Use And Maintenance Manual

Page: 57 / 456

DOLCECLIMA
>>>>>
EN - 19
ENGLISH
d . After a certain time (maximum three minutes) after the activation of the operation mode, the compressor
activates and the appliance starts delivering cold air.
3.7 TURBO COOLING MODE
• This function can be activated only from the control panel of the appliance.
a
. This mode can be selected by pressing key “ MODE ” once or more on the control panel until the icons
and “ Turbo ” appear on the display.
b . The function sets the appliance directly to cooling mode with a temperature of 17°C and maximum speed
of the fan in order to reach the set temperature more quickly.
c . In this mode it is not possible to select either the fan speed and the temperature.
d . To switch off the function, press key “ MODE ” on the control panel or switch off the appliance.
3.8 DEHUMIDIFICATION MODE (DRY)
a . When this mode is selected, the appliance dehumidifies the environment.
This mode can be selected by pressing the key “ MODE ” once or more (on the remote control or on the
control panel) until when the specific icon appears:
- on the control panel - on the remote control display.
b . In DRY mode, it is not possible to select the fan speed or to adjust temperature.
The fan motor works at low speed.
c . Keep doors and windows closed to achieve the best dehumidifying effect.
Do not place the air outlet pipe out of a window.
d . Connect the condensation discharge pipe (paragraph 2.6.a)
3.9 VENTILATION MODE (FAN)
a . When this mode is selected, the appliance doesn’t perform any action both on temperature or on air
humidity in the environment, but only maintains it in circulation.
b . This mode can be selected by pressing the key “ MODE ” once or more (on the remote control or on the control
panel) until when the specific icon is shown on the display of the control panel and/or of the remote control.
- icon on the control panel - icon on the remote control display
c . In this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key “ FAN ” on the remote control or the key
on the control panel.
d . The fan speed is displayed as indicated in paragraphs “3.1” (point SW7) and “3.2” (point D7).
3.10 HEATING MODE (HEAT)
(only for version with heat pump)
a . When this mode is selected, the appliance heats the environment.
b . This mode can be selected by pressing the key “ MODE ” once or more (on the remote control or on the
control panel) until when the specific icon
is shown on the display.
c . In this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key “ FAN ” on the remote control or the key
on the control panel.
The fan speed is displayed as indicated in paragraphs “3.1” (point SW7) and “3.2” (point D7).