Olimpia splendid DOLCECLIMA, Instructions For Use And Maintenance Manual

Page: 60 / 456

EN - 22
ENGLISH
c . Set the desired temperature on the remote control; the appliance works until it takes the temperature of
the area where the remote control is positioned to the value set on the remote control itself.
d . The remote control sends a signal to the appliance and, if it doesn’t receive a response within a maximum
time of 7 minutes, the function deactivates.
e . Press the key “ FOLLOW ME ” on the remote control or switch the appliance off to stop the function.
3.12.d Setting the unit of measurement of temperature
It is possible to choose the set and environment temperature unit of measurement choosing between ° C
(Celsius) or F (Fahrenheit).
Work as follows:
- On the control panel , press the keys + and - at the same time for approximately three seconds.
The desired unit of measurement appears on the display of the control panel.
- On the remote control , keep the central key TEMP pressed for approximately three seconds.
The desired unit of measurement appears on the display of the remote control.
The unit of measurement change must be performed both on the control panel and on the remote
control.
3.12.e Short Cut function
• This function can be activated only from the remote control.
a . When the appliance is running in any of its modes, press the key “ SHORT CUT ” on the remote control
and the appliance automatically configures itself to “ AUTO ” with a set temperature of 26°C (80 F).
3.12.f Auto-Restart
a . If the appliance switches off due to interruption of power supply, it automatically restarts with the previous
settings when electrical power is restored.
3.12.g Wi-Fi
a . Press SW8 for approximately 3 seconds to activate the “Wifi” function, on the display appears the message
“ AP ” waiting for connection to the device.
For the connection to the Wi-Fi network and the use of the App, please refer to the attached
Wi-Fi manual.
3.13 - HOW TO TRANSPORT THE CONDITIONER
• The conditioner must be kept upright during transport.
If it is transported in a horizontal position, wait at least one hour before starting
it.
• Prior to transport, always open the plug (24) and drain all the condensation.
CAUTION :
Moving the air conditioner on delicate flooring (e.g. wooden flooring):
• drain all the condensation water by opening the plug (ref. 24 fig. 21);
• Take great care when moving the conditioner as the wheels could mark the
flooring. Although the wheels are made from a rigid material and are swivelling,
they could get damaged by use or excessive dirt.