Olimpia splendid ARYAL S1 E 10 C, Instructions For Use And Maintenance Manual, Page: 69 / 316

ARYAL S1 E INVERTER 10-12-18-24 C
EN - 25
ENGLISH
3.6- DEHUMIDIFICATION
( figure 34 )
START
Check that the unit is connected and is powered electrically.
a.
Press the “MODE” key (1) to select “DRY” mode.
b.
Set the desired temperature by pressing the “TEMP” keys (4).
c.
When the remote control is “OFF”, press the “ON/OFF” key (2) to start the air conditioner.
STOP
a.
Press the “ON/OFF” key (2) to stop the air conditioner.
Fan speed cannot be adjusted when the unit is in AUTO and DRY modes.
3.7 - TIMER OPERATION
( fig. 33 e 34 )
START
Check that the unit is connected and is powered electrically.
a.
Press one of the TIMER keys (7 and 8) as desired.
The current adjustment of the timer is shown on the display at the side of the Timer ON and Timer OFF
indicators and will flash.
b.
Press the “TEMP” keys (4) to select the desired time.
Forward
Backward
Every time one of the “TEMP” keys (4) is pressed, the time moves forward or backward by 30 minutes,
depending on the direction of pressing.
c.
Once the time has been set for TIMER ON and TIMER OFF, check that the TIMER indicator on the indoor
unit display is on.
MODIFICATIONS
•
Repeat phases “a”, “b” and “c” to change the settings.
3.7.1 - Switch-on timer setting from the remote control (figures 33, 34 and 37)
When the unit has been switched on, select the operational mode, the desired temperature and fan speed
with which the unit will activate on scheduled switch-on.
Successively put the machine in Stand-By.
Press the “TIMER ON” key (7) to set the desired delay (from 1 to 24 hours), after which the unit will switch
on (starting from confirmation of the timer).
If no key is pressed within 5 seconds, the timer setting function ends automatically.
The remote control displays the countdown until switch-on.
Once the time set has expired, the unit starts with the last settings selected.
3.7.2 - Switch-off timer setting from the remote control (figures 33, 34 and 38)
With the unit in any operational mode, press the “TIMER OFF” key (8) to set the desired delay (from 1 to 24
hours), after which the unit will switch off (starting from confirmation of the timer).
If no key is pressed within 5 seconds, the timer setting function ends automatically.
The remote control displays the countdown until switch-off.
Once the time set has passed, the unit switches off.