OLIMEX© 2015
A10-OLinuXino-LIME user's manual
./change_display_A10_lime.sh
and choose the resolution and the interface (LCD, HDMI or VGA).
The supported resolutions are listed below.
For LCD:
1. 4.3" (480×272)
2. 7" (800×480)
3. 10" (1024×600)
For HDMI:
0. 480i
1. 576i
2. 480p
3. 576p
4. 720p50
5. 720p60
6. 1080i50
7. 1080i60
8. 1080p24
9. 1080p50
10. 1080p60
For VGA (please note that the VGA lacks a connector – more instructions on the VGA signals
might be found in the chapter 6):
0. 1680×1050
1. 1440×900
2. 1360×768
3. 1280×1024
4. 1024×768
5. 800×600
6. 640×480
7. 1920×1080
8. 1280×720
2.6 Connecting and calibrating a display
One of the ways to interact with the board is via an external display (with or without touchscreen
component). If you want to use a display for video output from the LIME board the best way is to
use the LCD_CON row of pins.
Note that unlike other OLinuXino boards A10-OlinuXino-LIME the row of pins that allows the user
to connect a display has smaller step (0.05''). The corresponding connectors in previous OLinuXino
boards had a step of 0.1''. This means that if you use a display made by OLIMEX, you would need
additional hardware to adapt the pin-step accordingly. You can either make such adapter (or cable)
Page 12 of 45
