Modular Wireless I/O System – User Guide
31
G.
4-20 mA Module Window Guide
1.
Input 1 Status
2.
Input 2 Status
3.
Output 1 Status (Red Needle)
4.
Output 2 Status (Red Needle)
5.
FailSafe
a.
Without the User Interface (default), the output reports last known value when RF or I/O failure occurs.
b.
Press “Fs” button and specific value can be assigned for output when RF failure occurs: use Blue Triangle needle to
set specific value. Set value is indicated in blue on dial and numeric display including last known value.
c.
Apply button – must click apply for changes to take effect.
6.
Force Output Button
a.
Press “F” button to manually force a specific output. Forcing an output bypasses normal signal: use Yellow needle
for adjustment.
b.
To disable forcing an output, press “F” again to deactivate force mode.
c.
Closing the User Interface or unplugging the mini USB cable will automatically deactivate any forced output(s).
7.
Apply button – must click in order for changes to take effect.
8.
Blue border indicates selected I/O Module.
9.
Orange border indicates forced output is active.
❶
❷
❸
❹
❻
❼
❽
❾
❺
Summary of Contents for Wio BM-0868-RM1
