OleumTech Wio BM-0868-RM1, User Manual

Page: 42 / 43

Modular Wireless I/O System – User Guide
41
17. REVISION HISTORY
Rev. A:
Original Release
Rev. B:
Added loop power wiring diagram for 4-20 mA I/O Module.
Added Power Budget Calculator hyperlink.
Rev. C:
Updated system overview.
Updated product technical specifications including power consumption.
Rev. D:
Revised RF security spec.
Rev. E:
Replaced Radio Module Wiring Diagram.
Rev. F:
RF timeout minimum interval changed to 2 seconds.
Analog I/O Modules under FailSafe reports last known value as default.
Rev. G:
Revised part numbers and added DataRail part numbers.
Rev. H:
LED behaviors: active high and low information added to Digital I/O Module section.
Warning added to Sec 6 B. Entire system with Radio and I/O Module(s) must be fully assembled before supplying power to the
Radio Module for the system to boot and operate properly. Failure to do so may cause RF link and I/O link to fail.
Rev. J:
Revised document template and replaced WIO logo.
Added 868 MHz radio option.
Updated Radio Module technical specifications.
Revised system overview information.
Added warnings in French.
Added high vibration warning.
Rev. K:
Moved Specifications section to the back of the guide.
Added additional wiring diagrams for Radio, Digital, and Analog 4-20 mA Modules.
Separated sections for each Module wiring diagrams.
Rev. L:
Revised 2.4 GHz RF range.
Revised Digital Level Output - Active High wiring to include a pull-down 10 K resistor.
Change section 9.c dry contact output wiring to NPN output wiring.
Rev. M:
Updated the Radio Module frontal image throughout the document with corrected P1 – NPN labeling.
Improved document outline formatting.