Page 47
DH3 WIRELESS GATEWAY
USER GUIDE
5.
Status - enable logging using dropdown menu
6.
Event type - select Rising or Falling edge
7.
Threshold - enter triggering point
a.
Rising (triggered when
≥ equal or greater than
threshold value)
b.
Falling (triggered when
≤ equal or less than
threshold value)
8.
Event Control – select deadband or on-delay
a.
Deadband: logs event when triggered by threshold and value must come
out of band (upper or lower limit) before it can be re-triggered
b.
On-delay (in seconds): logs event every time the delay time condition is
met
