3-10
94MS36 Rev. F2 S/W Ver 2.06
[EHI_]
Press the
2
key. The letters
[EHi_]
will appear in the Vacuum window.
The Exposure window will display the number of exposures made at
high power.
[ELo_]
Press the
2
key a second time. The letters
[ELo_]
will appear in the
Vacuum window. The Exposure window will display the number of
exposures at low power.
[ECr_]
Press the
2
key a third time. The letters
[ECr_]
will appear in the Vacuum
window. The number of exposures at medium power will be displayed
in the Exposure window.
•
Press the
0
key twice to exit this mode.
Selecting a Memory Location
•
Press and release the
Y
key on the operator control panel to cycle through
the 40 memory locations (0-39).
•
You may go to a particular memory by entering the desired memory
number on the numerical keypad on the integrator.
EXAMPLE
: Enter a desired memory number, e.g. 12. Press the
corresponding keys,
1
then
2
on the numerical keypad, then press the
Y
key.
Quick Keypad
Instant access by pressing any of the memory locations from 0 to 9.
0
2
4
6
8
9
7
5
3
1
Entering an Exposure Time
Press the
e
key on the integrator.
Note:
The Memory and Vacuum windows will dim.
[1825]
Enter desired exposure time by depressing corresponding number on key
pad. For example
1,8,2,5
•
Press the
e
key to confirm the entry.