94MS36 Rev. F2 S/W Ver 2.06
3-9
Exposure Statistics (Elapsed Hours)
Note:
The exposure statistics should be reset to zero when the lamps
are changed.
Note:
This provides the operating hours on the lamps in total and at
each intensity since the last reset. This function should be used
whenever the exposure lamps are replaced.
•
Press the
P
key on the integrator to power up the light, the front remote
switches, and the exposure unit's computer system.
[SEL_]
Press
1,2,3t 4
in sequence. The Vacuum window will read
[SEL_]
. This places you in the select mode.
[LE__]
Press the
1
key. The letters
[LE__]
will appear in the Vacuum window.
The Exposure window will display the exposure time, in seconds, of the
last exposure, regardless of its memory position or intensity.
[tot_]
Press the
1
key a second time, the letters
[tot_]
will appear in the
Vacuum window. The total elapsed time, in hours, that the unit has been
ON will be displayed in the Exposure window.
[tCr_]
Press the
1
key a third time. The letters
[tCr_]
will appear in the Vacuum
window. The elapsed time, in hours, that the lamp has been used at
medium power will show in the Exposure window.
[tLo_]
Press the
1
key a fourth time. The letters
[tLo_]
will appear in at the
Vacuum window. The elapsed time, in hours, that the lamp has been
used at low power will show in the Exposure window.
[tHi_]
Press the
1
key a fifth time. The letters
[tHi_]
will appear in the Vacuum
window. The elapsed time, in hours, that the lamp has been used at high
power will show in the Exposure window.
•
Press the
0
key twice to exit this mode.
Exposure Statistics (Total Exposures)
Note:
To find out how many exposures your system has made since the
last reset.
Note:
The exposure statistics should be reset when the lamps are
changed.
•
Press the
P
key on the integrator to power up the light, the front remote
switches, and the exposure unit's computer system.
[SEL_]
Press
1,2,3t 4
in sequence. The Vacuum window will read
[SEL_]
. This places you in the select mode.