Oldham MX62, Installation And Utilisation Manual

Page: 41 / 84

42
As does the standard LCD module, le LCD copy module indicates the system
status of the
WinPro
® by means of four LED.
If the LCD copy module is the last module to be operated on the display bus, the
bus will have to be terminated on the LCD copy module with the help of bus end
jumper J1 (see drawing of LCD module).
7.8. Loop-Module LOOPM
The address of the Loop Module are to be allocated with help of the fitted
ro-
tary switch.
Possible addresses for Loop Modules are 1,3,5 and 7.
In case another address (even numbers) is allocated the LOOPM activates the
Error LED.
The last output module has to form a bus end with two jumpers.
In comparison with the other modules on the output bus the LOOPM has two
jumpers J1 and J2 with only two contacts each.
•
J1 & J2 closed
è
terminated output bus
•
J1 & J2 open
è
non terminated output bus
The jumper J3 is not used as its position does not affect the function of the mo-
dule.