background image

OPERATING MANUAL

CW20

Hand-Held
Metal Detector

2-YEAR LIMITED WARRANTY

This product is warranted against defects in materials and workmanship under normal use for
two years from the date of purchase to the original owner.
Damage due to neglect, accidental damage or misuse of this product is not covered under this
warranty. Decisions regarding abuse or misuse of the detector are made solely at the discretion
of the manufacturer.

Proof of Purchase is required make a claim under this warranty.

Liability under this Warranty is limited to replacing or repairing, at our option, the metal detec-
tor returned, shipping cost prepaid to Fisher Labs. Shipping cost to Fisher Labs is the responsi-
bility of the purchaser.

To return your detector for service, please first contact Fisher Labs for a Return Authorization
(RA) Number. Reference the RA number on your package and return the detector within 15 days
of calling to:

Fisher

®

Research Labs, Inc.

1465-H Henry Brennan Dr., El Paso, TX 79936

Phone: 915-225-0333 ext.118

Warranty coverage does not include the cost of transporting the detector for an owner who is
located outside of the United States of America.
Fisher Research Labs does not warrant suitability for a specific purpose, and shall in no event be
liable for any direct, incidental, or consequential damages.

According to FCC part 15.21

Changes or Modifications made to this device not expressly approved by the party responsible for compliance

could void the users authority to operate this equipment.

This device complies with FCC Part 15 Subpart B Section 15.109 Class B

NOTE TO CUSTOMERS OUTSIDE THE USA

This warranty may vary in other countries, check with your distributor for details.

Warranty does not cover shipping costs.

MCW20 

Rev.2

022113   

 

Summary of Contents for CW20









Reviews: