11
2.
Configuration
The system consists of a controller module plus various other modules linked by
digital bus. Basic configuration is as follows:
•
Analog Input Module (AEM)
•
Controller Module (CM)
•
LED Module
The analog input module converts the 4-20mA of the transducers into digital bus
signals to be transmitted to the controller module where these are evaluated and
separately indicated for each channel according to the respective presetting. One
analog input and one LED module are provided for eight channels each. The
controller module can directly be employed for 64 channels.
In addition, further modules can be integrated into the system as required:
•
Basic Relay Module (RBM)
•
Extension Relay Module (REM)
•
Analog Output Module (AAM)
•
LCD Data Logger Module
•
Process and Field Bus Module
Each basic relay module provides eight relays to be freely allocated; the exten-
sion relay module allows a further eight relays using a minimum of space. The
analog output module is available for either 4-20mA or 0-10V. Furthermore, all
information and values measured can be displayed via the LCD module and
stored with a data logger.
Summary of Contents for MX62
