Oldham MX62, Installation And Utilisation Manual

Page: 52 / 84

53
8.2. Installation of the WinPro®
! ! Attention ! !
Make sure power supply is cut off prior to opening the unit.
8.2.1. Wall-mounted Housing
The size of the wall-mounted housing depends on the number of
modules. Attention is to be paid to free accessibility. Safety systems
should always be installed at a distance from any devices with high
generic emission.
8.2.2. 19"-Rack
The distance between the 19"-rack and the mounting plate must be
less than three metres. The sheath of the shielded line should be con-
nected with the housing at the entry of the switchboard cabinet and
on the mounting plate. The relay modules and LED modules can be
connected via a flat or bus cable. The maximum bus length is 1km.
8.2.3. Control Panel
The distance between controller module and mounting plate must be
less than three metres. The sheath of the shielded line must be con-
nected with the housing on the mounting plate. The relay modules
and LED modules can be connected via a flat or bus cable. The
maximum bus length is 1km.