4742-E P-32
SECTION 1 INVERTER UNIT (MIV UNIT)
5.
Controller ID Number
Eeospcsa1018
MIV units are connected to the network by servo link. In the servo link, the FCP board functions as
the master station and MIV units including the one controlling the spindle function as slave stations.
Accordingly, it is necessary to set the controller ID number at the MIV units according to the axis
names. For the setting of a controller ID number, a 5-bit switch is provided; set the ID number refer-
ring to the controller ID table.
•
2-axis spec. MIV unit for BL motors: Set the L and M side switches.
•
1-axis spec. MIV unit for BL motors: Set the L side switch. M side switch should be all OFF.
•
MIV unit for VAC motors: Set the L side switch.
•
The switch setting numbers are also shown on the electric circuit diagrams.
EIOSPCSA1022R01
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
