3.4 Analytical description of the working cycles
3.4.1 Model choice through the internal DATABASE
Select the working mode through
DATABASE
and press ENTER
Press ENTER
browse the list of car
types and versions by
means of the buttons UP
and DOWN
After the final selection, the unit shows the same display as in the “ MANUAL -AUTOMATIC mode” (see
here following) but indicates the recommended refrigerant quantity for the specific car model of your choice.
By selecting “START” and pressing ENTER, the unit starts an automatic working cycle, as explained more in
detail hereafter. Otherwise is also possible to select the single working cycles, and press ENTER in order to
perform that particular cycle only.
3.4.2 MANUAL /AUTOMATIC mode
Select
MANUAL
in order to reach the working cycle selection. All working cuclescycles can be done
automatically in one step by pressing on START, or you can perform the single working cycles one by one
Press ENTER
browse the differnet
working cycles by
means of the buttons UP
and DOWN
The unit displays following information :
1. Current vacuum time / leak test time settings
2. Current oil quantity setting
3. Current gas charging setting
Using the buttons “UP” and “DOWN” you may choose the desired function and press ENTER to start
Icon
Meaning
START
: immediate start of AUTOMATIC and complete working cycle according to the
parameters shown on display (all cycles performed at one time) (FOLLOWS)
Ecos-150 sw 1.x.x - ver. 1.0
Page 10/20
3
2
1
