32
CONTROLLER is in Alarm Status (see paragraph 6.1.1), if you select Always, the Top LED will always
illuminate.
The Glance mode setting defines the color of the Top LED and of the digits displayed in Glance Mode. If you
select
White
, the Top LED illuminates in white color (according to the criterion selected in Top LED setting)
and the digits displayed in Glance Mode are white. If you select
Dynamic
the color of the Top LED and the
color of the digits in Glance Mode follow the color coding reported in paragraph 6.1.1.
Figure 46 shows an overview of the complete system displaying current values of all controlled parameters.
Similarly to the Status Page you may have to refer to this window when asking for Okolab technical support.
Figure 46.Overview page
Figure 46 shows the Overview page when your system is equipped with the Objective Heater (OBJ COLLAR
####), CO2-O2-UNIT [0-10; 1-18] and HM-ACTIVE.
Pressing on
‘Glance Mode’
you can change the data visualization format on the Homepage that turns into a
brief information about the state of the controller and the attached ones.
Figure 47. Glance Mode with temperature controller only
