17
Figure 10. Chamber & Adapter change
Figure 11 Chamber & Adapter settings
Figure 12. Chamber and adapters saving
Tip
►
The system is shipped from the factory already set according to the incubating chamber model and
sample adapter you have ordered. Keep in mind that thermal control settings change when changing the
adapter in use. Hence, every time you change adapter you must input the correct one using the procedure
above. In case you purchase additional incubating chamber models make sure to input the correct
chamber/sample insert in the Setting prior to your experiment.
6.2.1.2
Control Mode
The Temperature Control can run in two different modes, please choose which one you want to use, Sample
or Chamber Feedback Mode.
Figure 13 shows how to select
Chamber Feedback Mode
.
