40
Software
You can adjust the following settings:
•
GPS
You can enable or disable the recording of GPS coordinates along to the actual scan data. After
activating GPS, the device determines the quality of available GPS data. This may take a short
moment. When a stable reception is provided the switch state changes to green automatically.
•
Headphones
You can enable or disable the internal Bluetooth module for usage with wireless headphones. After
activating this option, you should start the Bluetooth pairing process of your headphones. As soon as
the Gepard GPR and your Bluetooth headphones are paired the switch state changes to green
automatically.
•
Speaker
You can enable or disable the internal speaker. When using the device without headphones you can
activate the internal speaker to hear the sound output while conducting the measurement.
•
Color schema
You can decide which color schema you want to use for the visual representation of the scan data
while conducting a measurement. This color schema can be changed afterwards when analyzing
your measurement results.
After you have changed all settings according to your personal preferences, you can push the
button to
continue with step 3.
7.3.1.3 Project title and description
In the next step you must enter a project title, which is later on used to find your measurement from the list
of all recorded files (see section 7.4 “View scan” on page 46). You may also add some additional notes in the
description field (e.g. place of measurement, environment conditions, etc.).
You can change the value of each input by pushing the
button. All these information can also be changed
afterwards as described in section 7.4.5 “Changing project title and notes” on page 53.
After you have entered all information, you can push the
button to continue with step 4.
7.3.1.4 Choosing a scan type
During the next step you have to decide if you are going to conduct a 2D measurement (mainly one single
scan line) or a 3D measurement (several scan lines next to each other).
OKM GmbH
Figure 7.9: New Scan – Project title and description
