Assembly
21
Pr
eparing the Gepard GPR for use is very simple. After inspecting all of the components and ensuring that all
parts are present, assembly can begin
.
Before mounting both antennas, we recommend to mount the
telescopic shafts first. Therefor push one of the shafts into
the mounting socket for telescopic shaft that is situated on
the front part of the Gepard GPR (right beneath the Tablet
holder).
Push the shaft firmly into the socket until you hear a clicking
sound, that occurs when the little metallic hook snaps into
the socket.
Please pay attention that the little metallic hook is pointing
towards the second opening (see figure A). This hook must be
pushed down to release the telescopic shaft while
disassembling as shown in figure B.
Now connect the short end of the shaft’s cable to the
connector for transmitting antenna that is marked with a red
label (transmitting port).
While pushing the plug of the cable over the connector, you
have to make sure the little pins of the connector slide into
the L-shaped trenches of the plug (Bayonet mount).
As soon as the plug of the cable is completely pushed over the
connector, you have to turn the plug to fix its position.
OKM GmbH
A
B