26
Operating Modes
Select an empty memory slot to save your measurement permanently into the internal memory. If there
is no free slot available, you can also pick a used one and overwrite its data. In case you are going to
overwrite an existing measurement, the screen from figure 5.10 appears to confirm your decision.
If you really want to overwrite the existing measurement push the
button. The measurement is
now saved into the memory of your device and can be reopened at later times.
If you do not want to overwrite an existing measurement push the
button to get back to the
memory slot selection.
After the measurement has been saved successfully you will be redirected to the graphical
representation, as shown in figure 5.8 on page 25.
Push the
button to leave this screen and go back to the main menu.
OKM GmbH
Figure 5.9: Select empty memory slot
Empty memory slot
Slot number
Back to main menu
Stored measurement
Figure 5.10: Save measurement to memory
Save to memory
Back to main menu
Summary of Contents for FS Future GeoSeeker Mini
