OKM FS Future GeoSeeker Mini, User Manual

Page: 22 / 52

22 Operating Modes
After starting your GeoSeeker Mini you will see the main menu as shown in figure 5.1.
There you can select one of the following options:
• New Measurement
Choose this option to conduct a new geoelectrical measurement. You will have to follow some
additional steps to set up the depth range and the number of scan points.
• Show Memory
If you saved some of your measurements you can open it here to see its results.
• Settings
This option allows you to adjust the display brightness as well as getting information about
firmware, serial number and OKM contact details.
5.1 New Measurement
This is the option of your choice if you are going to create a new measurement. There are some
additional parameters to choose before the actual measuring takes place. The first parameter you have
to adjust is the maximum depth, as shown in figure 5.2.
Use the buttons and to change the depth value and confirm by pushing the button. This will
automatically open the next screen, that is shown in figure 5.3.
OKM GmbH
www.okmmetaldetectors.com
Figure 5.1: Main menu
Settings Show Memory
New Measurement
Figure 5.2: Adjusting the maximum depth
Increase depth
Decrease depth
Continue
Back to main menu