OKM eXp 6000, User Manual

Page: 69 / 86

Operating modes 69
B Here you are walking into West but you should go into East. So you are walking into the
opposite direction. Turn yourself around by 180° and walk into the opposite direction (East).
C This example shows that you are walking into a South direction which is exactly the right way to
your scan area because the direction arrow and the orientation indicator are pointing to each
other.
6.8.6 Copy files to USB stick
If you want to analyze your recorded scan images with the Visualizer 3D software you must copy your
files to an USB stick first.
1. Connect an USB stick to the USB port of your eXp 6000 control unit.
2. Start your file explorer and mark all scan files that you want to copy to the USB stick. If you are
going to copy all existing files you may use the mark all button to mark all files at once.
3. Now push the copy button in the toolbar on the top of the screen. In the dialog you will be
asked if you really want to start copying all marked files. Confirm by selecting "Yes" and wait
until all data has been transferred to the USB stick.
4. Disconnect the USB stick to free the screen lock and continue operating your eXp 6000.
After that you may connect your USB stick to any Windows computer to open the files for detailed
analysis with Visualizer 3D software.
6.9 Shutdown / Exit
Whenever you wish to shut down your device, it is important to use the “exit” function by selecting the
shutdown icon in the right bottom corner of the screen.
Do not power off the eXp 6000 by turning off the Power Pack. Powering off the Power Pack may cause
damage to the unit. After selecting the shutdown icon the screen from figure 6.35 will appear.
Now it is safe to power off the Power Pack and thus switch off the eXp 6000 control unit completely.
OKM GmbH
www.okmmetaldetectors.com
Figure 6.35: Shutdown