OKM eXp 6000 User Manual Download Page 60

Page: 60 / 86

Operating modes

•

Brightness

If the brightness is not regulated automatically, you have to set it up by yourself manually.

Simply select your preferred level of brightness.

•

Volume

Adjust your preferred level of volume here.

•

Use GPS

Here you can enable or disable the internal GPS functionality. Set the checkmark to enable the
GPS. If GPS is enabled all position coordinates will be stored along with your scan data. In that

way you will be able to navigate to your scan field later on as described in section 6.8.5 “GPS
navigation“.

6.7.2 Language

The eXp 6000 control unit comes with a variety of different languages to make it as easy as possible to

operate the device and its functions.

Select your preferred language from the list. The following languages were available at the time this

manual was printed:

•

German

•

English

•

French

•

Spanish

•

Italian

•

Polish

•

Norwegian

•

Arabic

•

Turkish

•

Farsi

•

Russian

•

Bulgarian

•

Greek

•

Dutch

•

Chinese

•

Vietnamese

In the future more languages could be added to this list.

OKM GmbH

www.okmmetaldetectors.com

Figure 6.24: Language settings

Summary of Contents for eXp 6000























































































Search results

Summary of Contents for eXp 6000

Reviews:

Related manuals for eXp 6000

Brands by name

Popular brands

OKM eXp 6000, User Manual

Search results

Summary of Contents for eXp 6000

Reviews:

Related manuals for eXp 6000

Brands by name

Popular brands