![background image](http://html1.mh-extra.com/html/okidata/okipage6e/okipage6e_service-manual_3671978036.webp)
Fusing
When the image transfer is completed, the toner image is fused to the paper by heat and pressure as the
paper with unfused toner image passes between the heater roller and the back-up roller. The heater roller
with Teflon coating incorporates a 400W heater (Halogen lamp), which heats the heat roller.
A thermistor which is in contact with the heater roller regulates the temperature of the heater roller at a
predetermined level (about 165°C). A safety thermostat cuts voltage supply to the heater off by opening
the thermostat in the event of abnormal temperature rises.
The back-up roller is held under a pressure of 3.8 kg applied by the pressure spring on each side.
Cleaning
When the transfer is completed, the residual toner left on the image drum is attracted to the cleaning roller
temporarily by static electricity, and the image drum surface is cleaned.
Summary of Contents for Okipage6e
