OKIDATA Okipage6e, Service Manual

Page: 174 / 250

When the ID of the printer is not corresponding, a dialog for selecting the corresponding printer name is
displayed. When the printer name is set, it is registered in the initialization
file and processed as a corresponding printer also for the next and subsequent startup.
The following is a display example of a printer set dialog.
#The following five types of printer names can be set.
OKIPAGE 4w
OL400w or OL410e/W
OL600e or OL600e/W
OL610e or OL610e/W
OKIPAGE 4w Plus
OKIPAGE 6ex or OKIPAGE 6e
Figure 4-5
Reload Button
The same setting as in the starting up of an application software can be made. It reads out the settings of
the printer being connected.
It is used to change the printer while running the same application program on the PC.
About Button
It displays information on the Maintenance Utility and the printer firmware.
#Figure 4-6
Exit Button
It ends the Maintenance Utility.
Setup Dialog
The Setup Dialog is displayed when "Setup" is selected from the system menu items on the Main Menu
Dialog.
In the Setup Dialog, selection of printer languages and printer port is available.
#Figure 4-7
(1) Printer Port
For selecting a printer port.
(2) Cancel
For canceling the setting and returning to the Main Menu Dialog.
(3) OK
For initializing the settings to reflect all the settings in the menu.