OKIDATA Okipage6e, Service Manual

Page: 169 / 250

Page: 93
Service Guide OKIPAGE6e
Chapter D Maintenance Utility Overview
Overview
This chapter describes the adjustment necessary when replacing a part. The adjustment is made by
changing the parameter value set in EEPROM on the Main Control PCB by means of a printer
driver or by a maintenance utility program.
A Maintenance Utility for the OKI LED printers (hereinafter referred to as the Maintenance Utility) is an
application program that runs on the Microsoft Windows 3.1 and Windows 95.
It is a software designed to set various settings such as printer engine menu, counter initialization, etc. by
sending environment setting command selected by the operator.
Environment setting languages transmitted is OPEL (Oki Print Environment Language) and PJL.
The printer supported by this utility is as shown below.
OKIPAGE4W
OL610e/610ex
OKIPAGE6e
OL600e/600ex
OL400W
OKIPAGE6ex
Purpose of the Maintenance Utility
The Maintenance Utility is an application program which is essentially a collection of command
transmission/reception functions for factory setting at the time of shipment from the factory and for
maintenance works performed by maintenance engineer at customers premises.
The Maintenance Utility is designed to be used only by service personnel and it should not be released to
the end-users.
How to Get the OKIPAGE 6e Maintenance Utility Program
The Maintenance Utility Program for the OKIPAGE 6e can be obtained as listed below.
Internet Web Site
www.okidata.com
OKILINK II Bulletin Board Service
1-800-283-5474
You will need the items / settings listed below.