background image

The positive carriers moved to the CTL combine with the negative charges on the image drum surface 
accumulated by the contact charge of the charge roller, lowering the potential on the image drum surface. 
The resultant drop in the potential of the irradiated portion of the image drum surface forms an 
electrostatic latent image on it. The irradiated portion of the image drum surface is kept to about -100 V.

Developing
Toner is attracted to the electrostatic latent image on the image drum surface, converting it into a visible 
toner image. Developing takes place through the contact between the image drum and the developing 
roller.

As the toner supply roller rotates while rubbing on the developing roller, a friction charge is generated 

1.

between the developing roller and the toner, allowing the toner to be attracted to the developing roller 
(the developing roller surface is charged positive and the toner, negative. 

The toner attracted to the developing roller is scraped off by the doctor blade, forming a thin coat of 

2.

toner on the developing roller surface.
Toner is attracted to the exposed portion (low-potential part) of the image drum at the

3.

contact of the image drum and the developing roller, making the electrostatic latent image visible

Summary of Contents for Okipage6e



























































































































































































































































Reviews: