OKIDATA Okipage6e, Service Manual

Page: 165 / 250

Do no change its default setting since this is a factory setting and were set at the factory.
Second tray paper feed setting
Do no change its default setting since this is a factory setting and were set at the factory.
Second tray download table selection
Do not change its default setting since this is a factory setting and were set at the factory.
Multi-purpose feeder setting
Do not change its default setting since this is a factory setting and were set at the factory.
Multi-purpose feeder download table selection
Do not change its default setting since this is a factory setting and were set at the factory.
Setting of standby temperature
Engine test selection
Do not change its default setting since this is a factory setting and were set at the factory.
Engine reset
All EEPROM areas used by the engine block are reset to the factory default values.
The following items are excluded.
Menu level-1
Menu level-2
Operator panel menu disable/enable
Head drive time setting
Head width setting
Head type setting
Transfer current setting
Page print disable/enable
Transition to the operation mode occurs completion of resetting.
Engine Maintenance Mode Menu System