Page: 35
Service Guide - OKIPAGE 8c
Chapter 3 Disassembly
3.3.8 Cover
Describes the method of removing the cover assy side (L)/(R), cover assy OP panel, cover front (L)/(R)
and the cover rear (L).
1. Remove the cover assy rear. (See 3.3.1)
2. Remove the cover assy stacker. (See 3.3.4)
3. Remove the 2 screws (1) then remove the frame side (L) (2).
4. Remove the 2 screws (3) then release the lock of the claw with the cover assy side (R) (4) lifted a little
bit, then remove the cover assy side (R).
5. Detach the operator panel cable (5) from the PCM PCB.
6. Open the FDR unit front in the arrow direction.
7. Remove the 2 screws (6) then remove the cover assy OP panel (7).
8. Remove the 2 screws (8), with the cover front (R) (9) pushed up, then release the lock of the claw,
then remove the cover front (R).
9. Remove the 2 screws (10) then remove the cover front (L) (11).
10. Remove the 2 screws (12) then remove the cover rear (L) (13).
11. Pull off the film (15) glued on the cassette guide.
12. Release the engagement with the guide by lifting the cover assy side (L) (14), then remove the cover
assy side (L).
Summary of Contents for OKIPAGE 8c
